|
 |
 |
General’s SRP model door is a pan-type product, 2” thick, made with tough 24-gauge, hot-dipped galvanized steel, and pre-finished with an extra-heavy duty paint system that totals 1.0 mil thick. It is available in four colors: Arctic White, Almond, Deep Brown, and Sandstone. Optional vinyl-backed polystyrene insulation yields an R-value of 6.8. This type of door is used by builders of new homes throughout the country. |
|
 |
|
The General Doors Advantage
General’s Advantage Door is a three layer product, made with a 1-3/8” thick polystyrene core sandwiched between two 26-gauge pre-finished steel skins. The steel is protected by a G60 galvanizing layer topped by a heavy duty two-coat baked–on polyester paint system. The rated R-value is 6.3 and the door is available in four colors: White, Almond, Brown, and Sandstone. This door is used by custom home builders and is a very popular replacement door.
|
|
 |
|
The General Doors Hampshire
The Hampshire Door is 1-3/4” thick, constructed of polyurethane foam injected between two 26-gauge steel skins. This is a super-insulated door with an R-value of 16.0, the highest available. This model is available in short or long panel designs (Colonial or Ranch Style) or in a plain flush front. It is available in five colors: White, Almond, Brown, Sandstone, and Gray. This door is used in colder climates or on any job where insulation is of significant importance. |
|
|
 |
|
The General Doors Flat Panel
Flat (or recessed) Panel doors provide an economical choice, while offering the most flexibility in design and size options. The standard model is made with hardboard panels and finger-jointed millwork, but plywood panels and clear rails are two available options. Doors are factory primed.
|
|
 |
|
The General Doors Cladwood Panel
The Cladwood Raised Panel door features the same millwork and construction of the flat panel door, but uses a durable, weatherproof raised panel. The panels are constructed of medium density particle board covered with a fiber overlay. Door sizes are limited because of the molds required for the panels.
|
|
 |
|
The General Doors Cedar Raised Panel
The Cedar Raised Panel door offers the beauty of ¾” thick cedar raised panels and clear and fine grade West Coast millwork. Panels are edge-glued vertical grain cedar, and the heavy duty rails and stiles are clear hemlock. Design and size flexibility are basically unlimited.
|
|
 |
|
The General Doors Flush Rough Sawn
The Flush Roughsawn door is made with an1/8” thick high quality compressed hardboard skin with deep wood-grain pattern glued to an internal wood frame and a 1-1/8” thick polystyrene core. This door is an economical option with good insulating qualities, odd size availability, and a very plain face that lends itself to custom overlay application. These features that have kept this door popular for many years.
|
|
|
|
The General Doors Flush Plywood
The Flush Plywood door is made with ¼” thick exterior luaun plywood glued to a 1-1/8 thick wood core on either one or both sides. The two-sided door has a polystyrene core. Size is limited to 10 ft. wide to keep one plywood sheet on the exterior. This door is a fine base for overlay applications.
|
|
|
|
The General Doors Flush Rough Sawn Plywood
The Flush Roughsawn Plywood door is made with an exterior skin of the premium grade 3/8” thick plywood siding Breckenridge. This is a very high quality plywood that looks and weathers like cedar, but with far less defects on the face veneer. It is available as a flush one side door on an open 1-1/8 frame, or as flush two side door with ¼” luaun plywood inside and a polystyrene core. Size is limited to 10 ft. wide to maintain one sheet on the face.
|
|
| |
