804-PB-1
Model 800-PB DC Motor Controller, together with Motor-Drive system (Without motor cover) & Manual Over-ride, for doors up to 16 Square Metres, depending upon door mass and stiffness of edge seals, of a minimum height of 2 metres and a maximum height of 5.5 metres. Minimum door size is 6.8 square metres. The kit includes a 4" (100mm) pulley to fit a 1" (25.4mm) door main shaft for use with standard lift cable drums to 6.5" (165mm) diameter. Ask for special software for doors of non-standard height. Complete with case lid mounted OPEN, STOP, and CLOSE buttons. Includes full safety control and adjustable Auto-Close timer. Sockets for a Plug-in optional remote control receiver (model 840) and a plug-in Bleeper (model 850). A/C supply: USA: 120V, EU: 220V, UK: 240V.

804-PB-2
As above, for high lift and Vertical lift doors to 16 Sqr Metres of a minimum height of 2 metres and a maximum height of 5.5 metres. Includes an 5" (125mm) pulley with a 1" (25.4mm bore for use with conical cable drums up to 8.75" (222mm) diameter.

804-PB-3
As above for high lift and Vertical lift doors to 16 Sqr Metres of a minimum height of 2 metres and a maximum height of 5.5 metres. Includes an 6" (150mm) pulley with a 1" (25.4mm bore for use with conical cable drums larger than 8.75" (222mm) diameter.

804-PB-1LH
As 804-PB-1, for Low Headroom doors. . The kit includes a 145mm deep "U" motor bracket and an Eye-Bolt and cable pulley to guide the manual over-ride lever cable from horizontal to vertical pull. Also a 4" (100mm) pulley to fit a 1"(25.4mm) door main shaft. For cable drums to 6.5" (165mm) diameter.

8804-PB-1
Model 8800-PB MK4 DC Motor Controller, together with Motor-Drive MK4 (without motor cover) & Manual Over-ride, for doors to 30 square metres of a minimum height of 3 metres and a maximum height of 7 metres with cable drums up to 8.75” (222mm) diameter. Minimum door size is 8.8 square metres. The kit includes an 8" (200mm) main shaft pulley to fit a 1” (25.4mm) door main shaft. Alternative 1.25” (32mm) shaft pulleys are listed below. Ask for special software for doors of non-standard height. MK4 system provides a limited rate of application of motor power increase during initial acceleration to limit drive and door stress. Complete with case mounted OPEN, STOP, and CLOSE buttons. Includes full safety control and adjustable Auto-Close timer. Sockets for optional remote control receiver (model 840) and Plug-in Bleeper (model 850).

8804-PB-2
As above for doors to 33 square metres of a minimum height of 3 metres MK4 and a maximum height of 7 metres with cable drums over 8.75” (222mm) diameter. Includes a 10" (250mm) main shaft pulley to fit a 1” (25.4mm) shaft. Alternative 1.25” (32mm) shaft pulleys are listed below.