|
|
 |
|
 |
|
Non-Insulated Ribbed
The Arm-R-Lite aluminum door's natural beauty, maximum freedom from warpage and sagging, natural resistance to corrosion, and lightness-to-strength ratio guarantees a lifetime of good looks and use with little or no maintenance.
|
|
 |
|
Insulated Ribbed
Arm-R-Lite's steel doors were developed to meet the needs of today's buildings. The rugged, heavy-duty product has steel hardware for smooth operation, is precision engineered to stand up to the rugged demands of industrial use, and has superior lifting ability that exceeds industry specification standards.
|
|
 |
|
The Arm-R-Lite Fiberglass Door
Thirty years ago, the fiberglass model was developed to provide residential and commercial buildings with the benefits of superior-quality, strong, translucent, lightweight and maintenance-free doors. |
|
|
 |
|
Panel
These doors are made in a traditional stile and rail construction method, using 1-3/4” thick select grade finger-joint Hem/Fir lumber and your choice of 1/4”hardboard, 1/4” plywood, or 3/8” thick MDO plywood panels. Glass can also be installed in any panel. This is a durable door with a rustic look and great design flexibility. |
|
|
|
Flushed
These doors are 1-5/8” thick, consisting of two 1/8” thick compressed hardboard skins bonded to a heavy wood frame and polystyrene core. The exterior skin is a rough-sawn texture, and the interior is smooth primed hardboard. This door is not recommended in high moisture or extremely humid areas. |
|
|
|
|
Advantage
General’s Advantage door is a three layer product, made with a 1-3/8” thick polystyrene core sandwiched between two 26-gauge pre-finished steel skins. The steel is protected by a G60 galvanizing layer topped by a heavy duty two-coat baked–on polyester paint system. The rated R-value is 6.3 and the door is available in four colors: White, Almond, Brown, and Sandstone. |
|
|
|
Hampshire
The Hampshire door is 1-3/4” thick, constructed of polyurethane foam injected between two 26-gauge steel skins. This is a super-insulated door with an R-value of 16.0, the highest available. This model is available in short or long panel designs (Colonial or Ranch Style) or in a plain flush front. It is available in five colors: White, Almond, Brown, Sandstone, and Gray. This door is used in colder climates or on any job where insulation is of significant importance |
|
| |
|
 |
|
The Arm-R-Lite Aluminum Door
General’s standard commercial door is a pan-type product, 2-1/8” thick, made with 24 gauge G-60 hot-dipped galvanized steel skin and heavy duty galvanized stiles welded to the skin on each side. It is available in a white or bronze color. This door can also be ordered with a 20 gauge skin (white only) for extra heavy duty applications.
|
|
 |
|
The Arm-R-Lite Steel Door
General’s insulated pan-type door is 2-1/8” thick, made with 24 gauge G-60 hot-dipped galvanized steel skin and heavy duty galvanized stiles welded to the skin on each side. Polystyrene insulation 1-7/16” thick is installed and covered with 26 gauge white painted steel or a heavy vinyl backer sheet. It is available in a white or bronze color. This door can also be ordered with a 20 gauge skin (white only) for extra heavy duty applications.
|
|
 |
|
The Arm-R-Lite Fiberglass Door
General’s Weather-Breaker Door is 1-3/4” thick, constructed of polyurethane foam injected between two G-60 hot-dipped galvanized steel skins. This is a super-insulated door with an R-value of 16.4. It is available in white or brown. This is an obvious choice if energy conservation is a foremost concern, but the Weather-Breaker’s sturdy, solid construction makes it a good choice in a wide variety of applications. |
|
| |
|
|
|
